News and Press Releases
-
London, 09 December 2020
Primetals Technologies to modernize drive system on the medium-wide hot strip mill of thyssenkrupp Hohenlimburg
thyssenkrupp Hohenlimburg GmbH has awarded Primetals Technologies an order to convert the existing cycloconverter drive systems to medium-voltage drive systems on stands 7 and 9 of its medium-wide hot strip mill in Hohenlimburg, Germany. The aims of the project are to replace the existing cycloconverter drive system while also increasing performance for future products. This was preceded by a joint analysis of the complete plant and a calculation to minimize the drive power actually required in order to optimize the investment budget.
more
-
London, 03 December 2020
Tosyali orders EAF Quantum electric arc furnace, secondary metallurgy and continuous slab caster from Primetals Technologies
Turkish steel producer Tosyali Demir Celik Sanayi A.S. has placed an order with Primetals Technologies to supply an EAF Quantum electric arc furnace, a twin vacuum-degassing plant with oxygen blowing and a two-strand slab caster for a flat steel greenfield project in Iskenderun, Turkey. The EAF Quantum is designed to handle metallic scrap and virgin materials such as HBI, pig iron in different composition and quality. The twin vacuum-degassing plant provides further treatment and steel quality to the production portfolio of Tosyali Demir Celik. Two-strand continuous slab caster provides a capacity of two million metric tons of slabs per year, to be increased to 3.4 million tons, and is able to process a wide range of steel grades.
more
-
London, 26 November 2020
Primetals Technologies achieves successful remote commissioning of process automation of continuous caster for Outokumpu in Tornio
In June 2020, Primetals Technologies successfully completed the online commissioning of the new software for optimizing the Level 2 process automation for the CCM1 continuous caster at Outokumpu’s plant in Tornio, Finland. The remote commissioning used empirical values gained from commissioning the similar CCM2 continuous caster at the same location in December 2019. As well as upgrading the process optimization software for the CCM2, Primetals Technologies also installed a TPQC (Through-Process Quality Control) caster system, which records all the quality data of the entire production process in a long-term archive.
more
-
London, 19 November 2020
Primetals Technologies upgraded E&A equipment of RH-plant and ladle furnace at CSN, Volta Redonda, Brazil
Primetals Technologies has successfully revamped electrics and automation systems at the Presidente Vargas Steelworks of Companhia Siderúrgica Nacional (CSN) in Volta Redonda, Rio de Janeiro State, Brazil. The electrics and automation systems of a RH degassing plant, a ladle furnace and the common alloy system were replaced with new versions. The RH plant and the ladle furnace were brought back into operation within only five months of order signing.
more
-
London, 17 November 2020
Primetals Technologies receives order from voestalpine to modernize automation of continuous annealing line 1
In September 2020, the Steel Division of voestalpine, an international steel and technology corporation, awarded Primetals Technologies an order to modernize the basic automation systems of the continuous annealing line 1 (KGL1) in the Linz plant in Austria. The replacement of the now obsolete systems will improve the operational safety and availability of the annealing plant as well as increase personal safety. All the sequence controllers will be modernized, and the KGL1 safety concept will be implemented. The project processing is especially challenging because work can only be executed during the ten- to twelve-day plant shutdowns which only take place about every six months.
more